 |
01.
How to block the electronic control VSI? |
 |
01.
While VSI is switched on, keep pressed the on-button
for approx. 1 second, until you hear a short acoustic
signal; push the joystick lever fully forward until
you hear another short acoustic signal; The display
will switch off. Now VSI control is blocked and does
not respond to any command when switched on.
Should the VSI control has been blocked, when switching
it on, the speed indicator display will flash for about
4 seconds, then it will switch off.
Pay attention: this is NOT a default of the VSI control. |
| |
|
|
02.
How to unblock the electronic control VSI? |
|
02. While
VSI is blocked, press the on-button to switch it on. Push
the joystick lever fully forward within the next 4 seconds,
until you hear a short acoustic signal; then pull the
joystick lever fully backwards until you hear a further
short acoustic signal, followed by a longer one. Now the
VSI control is unblocked and fully functioning. |
|
|
|
03.
Which kind of maintenance require the batteries ? |
|
03. No
maintenance is needed on the batteries supplied by Nuova
Blandino. |
| |
|
|
04.
Should the wheelchair not be used for a while, must the
batteries be charged ? |
|
04. We
recommend to make a full charging cycle every week, while
not using the wheelchair for a long period. |
| |
|
|
05.
When shall I charge batteries ? |
|
05. Always
check the indicator of the state of charge of the batteries
before driving your wheelchair. If the indicator shows
a low level, charge your batteries. |
| |
|
|
06.
Where can I buy new batteries ? |
|
06.
You should buy gel batteries at our reseller's.
Batteries for automotive are not suitable. |
| |
|
|
07.
How long is the warranty period ? |
|
07. Two
years on the electronic parts and 6 months on batteries. |
| |
|
